How to Get Odometer Reading From Scan Tool on 2007 Chevy Tahoe
How to install driver for Wi-Fi for adapters with RTL8814AU chipset (Alfa AWUS1900)
Meet likewise: How to install Wi-Fi driver in Linux if the estimator is offline
What is the chipset in Alfa AWUS1900
The RTL8814AU chipset has the post-obit West-Fi adapters:
- Alfa AWUS1900
- TRENDnet TEW-809UB
- ASUS USB-AC68
- TP-LINK Archer T9UH
- D-Link DWA-192
They are especially loved past those who perform wireless security testing of Wi-Fi networks, since they are modern wireless adapters that support monitor manner and can perform wireless injections.
The best on this list is the Alfa AWUS1900.
Previously, the realtek-rtl88xxau-dkms driver had support for the RTL8814AU chipset and for these wireless cards to work, it was enough to install the specified driver – on Kali Linux this could be done directly from the default repository, on other distributions it had to be compiled. But now RTL8814AU chipset support is disabled in the realtek-rtl88xxau-dkms commuter! A separate commuter has been made for this chipset, which may disharmonize with RTL8814AU! These changes are recent, so the old instructions for installing the driver for the Alfa AWUS1900 do not work.
If you practise not need the realtek-rtl88xxau-dkms driver (now supports RTL8812AU/21AU chipsets), and then uninstall it:
sudo apt remove realtek-rtl88xxau-dkms
If you lot demand it, then do not delete it and check if they will conflict.
How to install the Alfa AWUS1900 (RTL8814AU) driver in Kali Linux
To install the RTL8814AU driver, run the following commands.
Install dependencies:
sudo apt install dkms build-essential libelf-dev linux-headers-`uname -r`
Download driver source code:
git clone https://github.com/aircrack-ng/rtl8814au cd rtl8814au
Install the driver equally a DKMS module – this ways that when updating the kernel, you exercise not have to manually recompile the driver for the new kernel version. This will be washed automatically past the DKMS module. Also note that the make command is unnecessary since the compilation is done by the DKMS module.
sudo brand dkms_install
A reboot may exist required for the driver to work.
Pay attending to the lines:
DKMS: install completed. dkms status 8814au, v.eight.5.1, 5.9.0-kali2-amd64, x86_64: installed
DKMS reports that the installation is consummate and that the status for 8814au is "installed".
If you want to remove this driver, then get to the source lawmaking folder and execute there:
sudo make dkms_remove
Attention, if you run into an error, then check the department "Installing driver on Linux kernel >= 5.12".
How to install rtl8814au driver in Arch Linux, BlackArch
Start past installing the pikaur program according to the "Automatic installation and update of AUR packages" article. The pikaur program is analogous to pacman, but for working with the AUR, it allows yous to automatically install and update programs from the AUR. You will definitely love pikaur!
So run the control:
pikaur -S rtl8814au-aircrack-dkms-git
How to install rtl8814au driver in Debian, Linux Mint, Ubuntu
Run the following commands to install the rtl8812au commuter.
Install dependencies:
sudo apt update sudo apt install git build-essential libelf-dev linux-headers-`uname -r` debhelper dpkg-dev dkms bc
Download driver source code:
git clone https://github.com/aircrack-ng/rtl8814au cd rtl8814au
Install the commuter as a DKMS module – this means that when updating the kernel, yous do not take to manually recompile the driver for the new kernel version. This volition be done automatically by the DKMS module. Also note that the make command is unnecessary since the compilation is done by the DKMS module.
sudo make dkms_install
dkms status 8812au, 5.6.4.2_35491.20191025, iv.19.0-10-amd64, x86_64: installed 8814au, 5.8.5.i, 4.19.0-ten-amd64, x86_64: installed
DKMS reports that the installation is complete and that the status for 8814au is "installed".
Removing the commuter
To remove a driver from your arrangement, open a terminal in your source directory and run the post-obit command:
sudo make dkms_remove
How to fix Alfa AWUS1900 into monitor mode
The master thing to learn by now is to use the "ip" and "iw" commands instead of "ifconfig" and "iwconfig" – this applies to all Wi-Fi adapters.
For details, see the commodity: Linux Wi-Fi Cheat Sheet: Tips and Troubleshooting.
USB2.0/iii.0 style switch
Initial it volition use USB2.0 manner which will limit 5G 11ac throughput (USB2.0 bandwidth only 480Mbps => throughput effectually 240Mbps). When modprobe add following options will allow it switch to USB3.0 way at initial driver:
options 8814au rtw_switch_usb_mode=1
Switch usb2.0 => usb3.0
sudo sh -c "echo '1' > /sys/module/8814au/parameters/rtw_switch_usb_mode"
Switch usb3.0 => usb2.0
sudo sh -c "echo '2' > /sys/module/8814au/parameters/rtw_switch_usb_mode"
Installing commuter on Linux kernel >= 5.fifteen
When installing the commuter on Linux kernels >= 5.xv, you may run into an error:
Kernel preparation unnecessary for this kernel. Skipping... Edifice module: cleaning build area... 'make' -j4 KVER=5.fifteen.0-kali2-amd64 KSRC=/lib/modules/5.xv.0-kali2-amd64/build.....(bad exit status: ii) Mistake! Bad return status for module build on kernel: five.fifteen.0-kali2-amd64 (x86_64) Consult /var/lib/dkms/8814au/five.eight.5.one/build/make.log for more data. brand: *** [Makefile:2410: dkms_install] Ошибка 10
The driver in its current form is non uniform with Linux kernel version >= v.15. But there are already patches that solve the problem. Undoubtedly patches will be added to the main branch; earlier this happens, use the following code to install the commuter:
git clone https://github.com/morrownr/8814au cd 8814au sudo ./install-driver.sh
Source: https://miloserdov.org/?p=5493
0 Response to "How to Get Odometer Reading From Scan Tool on 2007 Chevy Tahoe"
Post a Comment